Yz-6 vibration speed sensor

A

B

Yz-6 vibration speed sensor

Yz-6 vibration velocity sensor can measure various displacements and velocities after being connected with Cdx-2 vibration monitor or cdx-2a vibration intensity monitor. The vibration of the rotor supported by the rolling bearing is transmitted to the bearing cover. The yz-6 vibration speed sensor installed on the bearing cover outputs the voltage by cutting the magnetic line of force by the internal moving coil, and provides the signal to the monitoring instrument to predict and alarm the mechanical fault.

Installation position: it is installed vertically or horizontally on the measured vibration point, and the bottom of the sensor is fixed with M10 screws

Technical parameters:

Sensitivity: 20 ~ 50mV / mm / s ± 1% (adjusted according to the user)

Frequency response (optional): 5 ~ 100 Hz, 10 ~ 500 Hz, 10 ~ 1000 Hz

Natural frequency: About 10Hz

Amplitude limit: 2mm (peak to peak)

Acceleration: 10g

Installation mode: vertical; Level; Vertical and horizontal dual-purpose

Temperature range: - 30 ℃ ~ 120 ℃

Relative humidity: to 95% non condensing

Overall dimensions: φ thirty-five × 78mm 

Weight: About 350g

Mounting thread: M10 × one point five

Ordering Guide:

Model selection code:

YZ-6- A□□-B□□

Model selection Description:

Sensitivity a □□: 01-50mv / mm / S; 02*——30mV/mm/S；  03——20mV/mm/S； 04——28.8mV/mm/S；

05——100mV/mm/S

Measurement direction B □□: 0 1 * - vertical; 0 2 - horizontal; 03 - both vertical and horizontal