Yc-do axial displacement transmitter

Yc-do series axial displacement transmitter

Yc-do series axial displacement transmitter is equipped with yh-do eddy current sensor, which is mainly used to measure the displacement of the rotor of rotating machinery relative to the stationary part. There are two types of transmitters:

Integrated: the proximitor and signal processing unit of eddy current sensor are integrated in the transmitter, as long as the eddy current sensor is configured φ 11mm probe, extension cable system.

Split type: to be connected φ 11mm eddy current sensor system (including proximitor, extension cable and probe)

technical parameter

■ measurement range: any range within 12mm;

■ current output: 4 ~ 20 mA, accuracy: ± 1% of full scale,

Load 500 Ω;

■ buffered output: the original signal output of the sensor;

■ alarm: set at any point within the full range, LED alarm indication, relay switching value contact output, capacity dc28v / 2A or AC250V / 1A;

■ operation status: NOK yellow light is on, and the probe or extension cable is faulty; Red light on: alarm indication.

■ power supply: + 24VDC ± 10% or 220VAC ± 10%, 50Hz, power consumption less than 6W.